预埋管铜冷却水套铸造工艺优化

韩旭; 宫本奎; 高增丽; 牛建平; 唐守秋; 刘运腾; 闫丽峰; 闫小影

doi:10.15980/j.tzzz.2019.09.008

计算机应用技术 | 浏览量 : 0 下载量: 49 CSCD: 0

导出
分享
收藏
专辑

预埋管铜冷却水套铸造工艺优化
Optimization on Casting Process of Copper Cooling Water Jacket with Embedded Pipe
2019年39卷第9期页码：956-959
纸质出版日期： 2019 ，
DOI： 10.15980/j.tzzz.2019.09.008

扫描看全文

[1]韩旭,宫本奎,高增丽,牛建平,唐守秋,刘运腾,闫丽峰,闫小影.预埋管铜冷却水套铸造工艺优化[J].特种铸造及有色合金,2019,39(09):956-959.

Han Xu, Gong Benkui, Gao Zengli, et al. Optimization on Casting Process of Copper Cooling Water Jacket with Embedded Pipe[J]. Special Casting & Nonferrous Alloys, 2019,39(9):956-959.
[1]韩旭,宫本奎,高增丽,牛建平,唐守秋,刘运腾,闫丽峰,闫小影.预埋管铜冷却水套铸造工艺优化[J].特种铸造及有色合金,2019,39(09):956-959. DOI： 10.15980/j.tzzz.2019.09.008.

Han Xu, Gong Benkui, Gao Zengli, et al. Optimization on Casting Process of Copper Cooling Water Jacket with Embedded Pipe[J]. Special Casting & Nonferrous Alloys, 2019,39(9):956-959. DOI： 10.15980/j.tzzz.2019.09.008.

摘要

建立了预埋管铜冷却水套铸造物理模型

设计了正交模拟试验方案

使用AnyCasting软件对冷却水套的铸造工艺进行模拟仿真

获得了优化的方案。在保证预埋铜管不被熔穿的前提下

铜管外壁与铸铜本体实现良好的熔合

提高了铜水套的导热能力。

Abstract

The physical model of copper cooling water jacket with embedded pipe was established

and the orthogonal experiment scheme was designed.The casting process of cooling water jacket was simulated by the AnyCasting software.A satisfied experimental scheme was presented.Under the conditions of ensuring that the embedded copper pipe not melted through

the outer wall of the copper pipe and the cast copper body were well fused

which improved the thermal conductivity of the copper water jacket.