铁基颗粒复合材料的组织与抗冲蚀性能

许大庆; 罗吉荣; 黄乃瑜

浏览量 : 0 下载量: 85 CSCD: 21

导出
分享
收藏
专辑

铁基颗粒复合材料的组织与抗冲蚀性能
The Structures and Erosive Resistance of Iron Matrix Particle Composites
1998年第6期
纸质出版日期： 1998 ，
DOI：

扫描看全文

[1]许大庆,罗吉荣,黄乃瑜.铁基颗粒复合材料的组织与抗冲蚀性能[J].特种铸造及有色合金,1998(06):10-12.

Xu Daqing Luo Jirong Huang Naiyu. The Structures and Erosive Resistance of Iron Matrix Particle Composites[J]. Special Casting & Nonferrous Alloys, 1998,(6).
[1]许大庆,罗吉荣,黄乃瑜.铁基颗粒复合材料的组织与抗冲蚀性能[J].特种铸造及有色合金,1998(06):10-12. DOI：

Xu Daqing Luo Jirong Huang Naiyu. The Structures and Erosive Resistance of Iron Matrix Particle Composites[J]. Special Casting & Nonferrous Alloys, 1998,(6). DOI：

摘要

采用实型负压铸造法制备出铁基颗粒复合材料，分析了复合层的微观组织，研究了其显微硬度分布，测定了复合层的抗冲蚀性能。研究结果表明，铁基颗粒复合材料具有较高的硬度、良好的抗冲蚀性能，明显改善了基体材料的性能。

Abstract

The vacuum evaporative pattern casting is used to manufacture iron matrix particle composites. Microstructures and microhardness of the composites layers were analyzed distribution. The erosive resistance of the composites layers were measured. The results show that the iron matrix particle composites have high hardness

good erosive resistance properties. The properties of the matrix materials have been improved obviousely.