1Cr18Ni9Ti的流变浆料制备和直接轧制试验

赵爱民; 毛卫民; 张乐平; 张丽娟; 云东; 康永林; 钟雪友

浏览量 : 0 下载量: 78 CSCD: 4

导出
分享
收藏
专辑

1Cr18Ni9Ti的流变浆料制备和直接轧制试验
Preparation and Direct Rolling Test of the Semi-solid Rheological Slurry of 1Cr18Ni9Ti Stainless Steel
2002年第S1期页码：278-281
纸质出版日期： 2002 ，
DOI：

扫描看全文

[1]赵爱民,毛卫民,张乐平,张丽娟,云东,康永林,钟雪友.1Cr18Ni9Ti的流变浆料制备和直接轧制试验[J].特种铸造及有色合金,2002(S1):278-281.

Zhao Aimin Mao Weimin Zhang Leping Zhang Lijuan Yun Dong Kang Yonglin Zhong Xueyou. Preparation and Direct Rolling Test of the Semi-solid Rheological Slurry of 1Cr18Ni9Ti Stainless Steel[J]. Special Casting & Nonferrous Alloys, 2002,(S1):278-281.
[1]赵爱民,毛卫民,张乐平,张丽娟,云东,康永林,钟雪友.1Cr18Ni9Ti的流变浆料制备和直接轧制试验[J].特种铸造及有色合金,2002(S1):278-281. DOI：

Zhao Aimin Mao Weimin Zhang Leping Zhang Lijuan Yun Dong Kang Yonglin Zhong Xueyou. Preparation and Direct Rolling Test of the Semi-solid Rheological Slurry of 1Cr18Ni9Ti Stainless Steel[J]. Special Casting & Nonferrous Alloys, 2002,(S1):278-281. DOI：

摘要

利用自行设计装置进行 1Cr18Ni9Ti不锈钢的半固态流变浆料制备和半固态流变浆料的直接轧制试验。结果表明 :在本试验条件下制备的 1Cr18Ni9Ti不锈钢半固态流变组织中先结晶的奥氏体呈近球状

尺寸在 10 0～ 2 0 0 μm

半固态流变浆料的固相率为 5 0 %～ 60 % ;该流变浆料具有较好的流动性

在半固态直接轧制成形过程中会产生液相偏析和一定程度的固相颗粒塑性变形

Abstract

The preparation and direct rolling test of semi solid rheological slurry of 1Cr18Ni9Ti stainless steel were conducted using self designed equipment. The results showed that solid phase particles of the primary austensite with the size of 100～ 200 μm in 1Cr18Ni9Ti stainless steel rheological slurry have near sphere shape and the solid fraction of the rheological slurry is 50%～60%. The rheological slurry has better fluidity. The segregation of liquid phase and plastic deformation of some solid particles in the slurry occur during direct semi solid rolling.