冲头式挤压铸造ZA43合金组织和性能的研究

于海朋; 张尚洲; 李荣德; 孙立涛; 白彦华

浏览量 : 0 下载量: 41 CSCD: 1

导出
分享
收藏
专辑

冲头式挤压铸造ZA43合金组织和性能的研究
Research on Structure and Properties of Punch Squeeze Casting ZA43 Alloy
2001年第S1期页码：110-112
纸质出版：2001
DOI：
稿件说明：

移动端阅览

于海朋, 张尚洲, 李荣德, 等. 冲头式挤压铸造ZA43合金组织和性能的研究[J]. 特种铸造及有色合金, 2001,(S1):110-112. DOI：

Yu Haipeng Zhang Shangzhou Li Rongde Sun Litao Bai Yanhua. Research on Structure and Properties of Punch Squeeze Casting ZA43 Alloy[J]. Special Casting & Nonferrous Alloys, 2001, (S1): 110-112. DOI：

摘要

研究了工艺参数、变质和热处理对冲头式挤压铸造ZA43合金组织和性能的影响。结果表明:控制工艺参数可获得高塑性的ZA43合金（δ5=22％

σb=385 MPa）。变质处理使铸件组织分布更趋于均匀

性能更稳定

B-Ti变质的效果好于RE变质。经过320℃固溶处理可获得高强度（σb=485 MPa

δ5=13％）

选择250℃热处理则获得良好的综合性能（σb=470MPa

δ5=16％）。

Abstract

The effects of technological parameters

modification and heat treatment on the structure and mechanical properties of punch squeeze casting ZA43 alloy have been investigated. The results show that castings of high plasticity （δ5 = 22%

σb

= 385 MPa） can be obtained by controlling the parameters . The punch squeeze castings of modified ZA43 alloy led to further uniform of the structure and stablizing properties. The effect of B-Ti modified ZA43 alloy was better than RE. Moreover

castings of high strength（σb = 485 MPa

δ5 = 13%） can be achieved by solution treatment of 320 ℃

castings of fairly comprehensive properties（σb = 470 MPa

δ5 = 16%）can be obtained by treatment of 250℃.