消失模铸造冒口工艺改进的探讨及应用

郭若东

浏览量 : 0 下载量: 223 CSCD: 1

导出
分享
收藏
专辑

消失模铸造冒口工艺改进的探讨及应用
Discussion and Application on Runner for Lost Foam Casting
2005年第3期页码：182-183
纸质出版日期： 2005 ，
DOI：

扫描看全文

[1]郭若东.消失模铸造冒口工艺改进的探讨及应用[J].特种铸造及有色合金,2005(03):182-183+128.

Guo Ruodong. Discussion and Application on Runner for Lost Foam Casting[J]. Special Casting & Nonferrous Alloys, 2005,(3):182-183.
[1]郭若东.消失模铸造冒口工艺改进的探讨及应用[J].特种铸造及有色合金,2005(03):182-183+128. DOI：

Guo Ruodong. Discussion and Application on Runner for Lost Foam Casting[J]. Special Casting & Nonferrous Alloys, 2005,(3):182-183. DOI：

摘要

在消失模铸造中为避免铸件产生气孔、夹渣、冷隔等缺陷

着重探讨将冒口改为大气压力冒口

并填入覆盖剂

使冒口除起补缩作用外

还有提高铸件保温、排气和集渣的作用

从而提高了铸件的成品率

并推荐了覆盖剂、砂芯基本材料和工艺配方案。

Abstract

To prevent gas-hole

inclusion and cold shut in the castings in lost foam casting

air-runner was adopted and the cover-agent was filled into the runner to make the runner not only have the feeding effects but also improve the holding temperature

exhaust and collection slag

so the product yield is improved.Cover agent

basic materials for sand-core and technology were given.