铸渗法制备Mo<sub>2</sub>FeB<sub>2</sub>增强钢基表面复合材料

李文虎; 徐峰; 刘福田

复合材料 | 浏览量 : 0 下载量: 219 CSCD: 5

导出
分享
收藏
专辑

铸渗法制备Mo₂FeB₂增强钢基表面复合材料
Preparation of Mo₂FeB₂ Reinforced Steel Substrate Composites by Casting-infiltration Method
2009年29卷第1期页码：57-59
纸质出版日期： 2009 ，
DOI：

扫描看全文

[1]李文虎,徐峰,刘福田.铸渗法制备Mo_2FeB_2增强钢基表面复合材料[J].特种铸造及有色合金,2009,29(01):57-59+3.

Li Wenhu1, Xu Feng1, Liu Futian2. Preparation of Mo₂FeB₂ Reinforced Steel Substrate Composites by Casting-infiltration Method[J]. Special Casting & Nonferrous Alloys, 2009,29(1):57-59.
[1]李文虎,徐峰,刘福田.铸渗法制备Mo_2FeB_2增强钢基表面复合材料[J].特种铸造及有色合金,2009,29(01):57-59+3. DOI：

Li Wenhu1, Xu Feng1, Liu Futian2. Preparation of Mo₂FeB₂ Reinforced Steel Substrate Composites by Casting-infiltration Method[J]. Special Casting & Nonferrous Alloys, 2009,29(1):57-59. DOI：

摘要

采用反应铸渗法在钢基体表面制备一层三元硼化物金属陶瓷复合材料

研究了三元硼化物钢表面复合材料的硬度、耐磨性

用SEM-EDS研究了铸渗层的微观结构和元素分布。结果表明

通过反应铸渗法制备的三元硼化物钢表面复合材料的洛氏硬度为74.3

维氏硬度为789N/mm2;磨损主要为磨粒磨损。并对铸渗反应机理进行了初步讨论。

Abstract

Hardness and wear resistance of ternary boride cermet on steel substrate prepared by casting-infiltration method were examined

and microstructure and element distribution in casting-infiltration layer were observed by SEM （scanning electron microscope） and EDS （energy dispersive spectrum）. It is found that the Rockwell hardness and Vickers hardness of the composites reach HRA 74.3 and 789 N/mm2

respectively. The wear mechanism of the composites is characterized by abrasive friction. Mechanism of casting-infiltration was described also.

关键词

铸渗三元硼化物金属陶瓷

Keywords

Casting-infiltrationTernary BorideCermet

references

文章被引用时，请邮件提醒。

提交

金属陶瓷润湿性影响因素的研究进展

铸渗法制备Mo2FeB2增强钢基表面复合材料

Preparation of Mo2FeB2 Reinforced Steel Substrate Composites by Casting-infiltration Method

DOI：

摘要

Abstract

关键词

Keywords

references

铸渗法制备Mo₂FeB₂增强钢基表面复合材料

Preparation of Mo₂FeB₂ Reinforced Steel Substrate Composites by Casting-infiltration Method