高储能Zr基非晶合金弹簧的制备

索忠源; 宋艳玲; 王海波; 邱克强

试验研究 | 浏览量 : 0 下载量: 147 CSCD: 2

导出
分享
收藏
专辑

高储能Zr基非晶合金弹簧的制备
Fabrication of Zr-based Glassy Coil Spring with High Storage Energy
2011年31卷第2期页码：104-106
纸质出版日期： 2011 ，
DOI：

扫描看全文

[1]索忠源,宋艳玲,王海波,邱克强.高储能Zr基非晶合金弹簧的制备[J].特种铸造及有色合金,2011,31(02):104-106+199.

Suo Zhongyuan1, Song Yanling2, Wang Haibo1, et al. Fabrication of Zr-based Glassy Coil Spring with High Storage Energy[J]. Special Casting & Nonferrous Alloys, 2011,31(2):104-106.
[1]索忠源,宋艳玲,王海波,邱克强.高储能Zr基非晶合金弹簧的制备[J].特种铸造及有色合金,2011,31(02):104-106+199. DOI：

Suo Zhongyuan1, Song Yanling2, Wang Haibo1, et al. Fabrication of Zr-based Glassy Coil Spring with High Storage Energy[J]. Special Casting & Nonferrous Alloys, 2011,31(2):104-106. DOI：

摘要

利用真空水淬法

制备了线径为4mm、中径为35mm、匝数为6的Zr41.2Ti13.8Ni10.0Cu12.5Be22.5非晶合金弹簧。采用SEM、XRD、DSC分别研究了弹簧的微观形貌、相结构和热稳定性。结果表明

该弹簧为完全的非晶态。利用数显弹簧拉压机

测得非晶合金弹簧的刚度为3.67N/mm

该值与计算值基本符合。非晶合金弹簧储能高达2451.6kJ

是60Si2Mn合金弹簧的3倍。

Abstract

Zr41.2Ti13.8Ni10.0Cu12.5Be22.5 glassy coil spring with wire diameter of 4 mm and a mean diameter of 35 mm and 6 in coils was fabricated by vacuum-water quenching method.Microstructure

phase structure and thermal stability of the amorphous alloy spring were analyzed by the help of SEM（scanning electron microscope）

XRD（X-ray diffraction）

DSC（differential scanning calorimetry）.The results reveal that the coil spring is completely composed of amorphous phase in the as-cast sample.Mechanical properties of the glassy coil spring were examined by digital spring pull-compressor.The results show that the rigidity of the glassy spring reaches 3.67N/mm

which is accordant with that of calculated ones.Storage energy of the spring reaches up to 245.6kJ

which is three times of that in 60Si2Mn alloy spring.

关键词

非晶合金弹簧弹簧刚度储能水淬

Keywords

Glassy Coil SpringRigidity of SpringStorage EnergyWater Quenching

references

文章被引用时，请邮件提醒。

提交

熔模铸件孤立热节热型壳局部水淬试验