铝熔炼炉燃烧器水平夹角的优化模拟

王计敏; 闫红杰; 周孑民; 李世轩; 贵广臣

试验研究 | 浏览量 : 0 下载量: 80 CSCD: 1

导出
分享
收藏
专辑

铝熔炼炉燃烧器水平夹角的优化模拟
Optimization and Simulation of Horizontal Angle between Burners in an Aluminum Melting Furnace
2011年31卷第9期页码：791-796
纸质出版日期： 2011 ，
DOI：

扫描看全文

[1]王计敏,闫红杰,周孑民,李世轩,贵广臣.铝熔炼炉燃烧器水平夹角的优化模拟[J].特种铸造及有色合金,2011,31(09):791-796.

Wang Jimin~1, Yan Hongjie~1, Zhou Jiemin~1, et al. Optimization and Simulation of Horizontal Angle between Burners in an Aluminum Melting Furnace[J]. Special Casting & Nonferrous Alloys, 2011,31(9):791-796.
[1]王计敏,闫红杰,周孑民,李世轩,贵广臣.铝熔炼炉燃烧器水平夹角的优化模拟[J].特种铸造及有色合金,2011,31(09):791-796. DOI：

Wang Jimin~1, Yan Hongjie~1, Zhou Jiemin~1, et al. Optimization and Simulation of Horizontal Angle between Burners in an Aluminum Melting Furnace[J]. Special Casting & Nonferrous Alloys, 2011,31(9):791-796. DOI：

摘要

为提升铝熔炼炉热效率、降低污染物排放和提高熔体质量

在对某厂蓄热式铝熔炼炉热平衡测试的基础上

建立合理的铝熔炼炉模型

提出了优化准则。运用计算流体力学软件Fluent对铝熔炼炉燃烧器不同水平夹角下铝液和炉膛的耦合物理场进行了仿真优化。经过对不同燃烧器水平夹角下的优化分析

结果表明

燃烧器水平夹角为90°时

铝熔炼炉能获得最佳的熔炼性能。

Abstract

In order to improve the energy efficiency and melt quality and to reduce the pollutant emission

based on validating results by heat balance test for regenerative aluminum melting furnace from a company

a reasonable model of aluminum melting furnace was established to optimize processing parameters.CFD software Fluent was used to simulate and optimize coupling field between liquid aluminum and combustion space at the varied horizontal angle between burners of the aluminum melting furnace.The results show that the desirable melting performance can be obtained with the horizontal angle between burners of 90°.